1、 Preparation before startup

1. Check the appearance of the equipment to ensure that there is no damage or debris, and that there are no obstacles around the equipment.

2. Check if the power cord and all connecting wires are intact, without damage or exposed metal parts.

3. Confirm that the gas source connection is normal, the air pressure is stable, and the pressure gauge displays normally.

4. Select appropriate cutting tools and cutting depths based on production needs.

5. Turn on the power switch, start the device, and check if all components of the device are running normally and if there are any abnormal sounds.

2、 Loading and positioning

1. Place the board to be cut on the equipment workbench, ensuring that the board is flat and free from warping.

2. Adjust the position and angle of the workbench according to the size of the board and cutting requirements, ensuring accurate alignment between the board and the cutting tool.

3. Use fixtures or pressure plates to fix the board and prevent it from moving or warping during the cutting process.

3、 Set cutting parameters

1. Set parameters such as cutting speed, cutting depth, and cutting frequency according to the material, thickness, and cutting requirements of the board.

2. Adjust the tool position to ensure accurate alignment between the tool and the board, avoiding cutting deviation.

3. After confirming that the cutting parameters are correct, start cutting.

4、 Cutting process

During the cutting process, pay attention to observing the cutting effect. If there are any abnormal situations, stop the machine in time for inspection.

During the cutting process, keep the equipment stable and avoid external interference that may cause cutting deviation.

3. After cutting is completed, turn off the power of the equipment and remove the cut sheet.

5、 Equipment maintenance and upkeep

1. Regularly clean the dust and debris inside and outside the equipment to keep it clean.

2. Regularly check the power cords and connecting lines of the equipment, and replace them in a timely manner if they are damaged or aged.

3. Regularly check the wear of the cutting tools, and replace them in a timely manner if they are severely worn.

4. Regularly lubricate and maintain the equipment to ensure smooth operation.

6、 Safety precautions

Before operating the equipment, be sure to familiarize yourself with the equipment operation manual and safety regulations.

During the operation, it is necessary to wear safety protective equipment such as protective goggles and gloves.

3. It is prohibited to touch the cutting tools and cutting areas during the operation of the equipment to avoid accidents.

If any equipment malfunction or abnormal situation is found, the machine should be stopped immediately and professional personnel should be contacted for maintenance.

Through the above six steps, we can complete the operation of the Zhimao board splitter. In the actual operation process, it is necessary to strictly follow the operating steps and safety regulations to ensure the normal operation and safe operation of the equipment. At the same time, regular maintenance and upkeep of equipment can extend its service life and improve production efficiency.

I hope the above content can be helpful to you. If you have any questions or need further information about the Zhimao Plate Splitting Machine, please feel free to contact us at any time. We will serve you wholeheartedly!