Cleaning area size: 750mm (L) × 750mm (W) × 40mm (H)

Equipment appearance dimensions: 1700mm (L) × 1200mm (W) × 2100mm (H)

Power/Gas Source: Three phase five wire system, 380V/18Kw (rated power)/0.45Mpa-0.7Mpa

Tank capacity: 70L

Spray tank dilution tank heater power: 9KW

Cleaning time: 0-99 minutes (adjustable)

Cleaning temperature (liquid): room temperature~70 ℃ (adjustable)

Rinse time: 1 minute/time (1-59 times/adjustable)

Rinse temperature (DI water): Room temperature~70 ℃ (adjustable)

Drying time: 0-99 minutes/(adjustable)

Cleaning size range setting: 50-750mm


Equipment Introduction
The MDM-1000 steel mesh cleaning machine is a fourth generation mesh cleaning machine designed specifically for the "Water Based" process: it automatically completes the cleaning, rinsing, and drying processes (Using a unique dual eight spray arm cleaning and rinsing design, a dual four handle wind blade air cutting and drying design, and online filtering for cleaning and rinsing to ensure cleanliness) Applied to the cleaning of SMT steel mesh, copper mesh, adhesive mesh, printing adhesive fixture, PCB misprinted board and PCBA, it can effectively clean the residual solder paste, red glue and other pollutants on the surface and hole wall after printing;

Equipment features:

1. Fully automatic cleaning mode: The mesh board is thrown up and down, and the high-pressure spray system sprays heated cleaning solution, which can automatically clean, rinse, and dry the entire process of the mesh board in all directions;

2. Full process visualization: Visual window and LED light device, making the cleaning process clear at a glance;

3. The most scientific nozzle design (patent): adopting a distribution of 8 spray arms on both sides - completely solving the cleaning blind spot, the spray arms and nozzles are detachable;

4. Visual nozzle pressure adjustable: solves the collision and splashing problems of small workpiece sizes under high-pressure spray conditions during cleaning;

5. The observation window and the entrance of the mesh board are equipped with photoelectric sensors to protect personal safety, and the standard diluent tank/rinse tank heating system greatly improves cleaning efficiency Shorten cleaning time;

6. Comprehensive cleaning system: compatible with running water washing or chemical cleaning, for SMT; Thoroughly and effectively clean the organic and inorganic pollutants such as rosin, water-soluble flux, cleaning free flux/solder paste left on the surface of THT PCBA after welding;

7. Body quality: The overall body is made of 304 stainless steel, and it is resistant to acid, alkaline and other cleaning solutions;

8. Cleaning the built-in filtering device can achieve solvent recycling and reduce solvent usage;

9. There is an emergency stop button and leakage protection function when a fixed fault occurs;

10. Lower operating costs: lower equipment investment costs, localized services, team, and sufficient spare parts supply.

Equipment parameter configuration

Cleaning area: The cleaning storage tank is used to recycle and store cleaning solution, and to perform 4-level filtration, heating and monitoring, and liquid level monitoring on the cleaning solution.

Cleaning water pump: 2.2KW (1 unit), 4 spray arms, 40 nozzles;

Storage tank capacity: ≤ 90L (1 unit);

Filtering device: Stainless steel filter screen 1mm (1 piece), filter screen baffle 100 mesh (1 piece), liquid tank filter bag: 10UM (1 piece), cleaning folding filter element 0.45UM (3 pieces);

Heating power: 9KW (1 unit), heating temperature: room temperature -70 ℃ (adjustable);

Liquid level protection: low, medium, stop position, over limit position;

Spray pressure: 0.1-0.6Mpa (adjustable)

Rinsing area: The rinsing water storage tank is used to recycle stored water and perform 4-level filtration, heating and monitoring, and liquid level monitoring on the rinsing water.

Rinse water pump: 2.2KW (1 unit) with 4 spray arms and 40 nozzles;

Rinse water storage tank capacity: ≤ 90L (1 unit);

Heating power of rinsing water tank: 9KW (1 unit); Heating temperature: Room temperature -70 ℃ (adjustable);

Filtering device: Stainless steel filter screen 1mm (1 piece), filter screen baffle 100 mesh (1 piece), liquid tank filter bag: 10UM (1 piece), cleaning folding filter element 0.45UM (3 pieces);

Liquid level protection: low, medium, stop position, over limit position;

Spray pressure: 0.1-0.6Mpa (adjustable)

Drying area: The drying section is used to thoroughly dry the product and to heat the air, cut and heat the air, and monitor the temperature.

Wind blade fan: 3.45KW (1 unit), stainless steel heating tube: 6KW (1 unit), 4 air cutting blades, heating temperature: room temperature -60 ℃ (adjustable);

Screen board up and down running device: The running device is composed of a stepper motor, stepper driver, and encoder that rotate smoothly;

Stepper motor: 1 set of stepper driver: 400W (1 unit), 1 encoder;