All the machines are not well packaged and repairs will be scrapped soon. How to repair the PCB sub-board? Shenzhen Nsdtech Technology Co., Ltd will give you a good start of the technical maintenance process of the PCB sub-board machine!
1. The splitter is connected to the multi-plate after soldering. When breaking, it will often damage the line or break the electronic parts. The machine is divided by the knife-type travel, which can completely reduce the stress, prevent the crack of the solder joint and break the parts, and improve the production. Efficiency and quality.
2, using the upper knife under the flat knife method, the board is on the lower flat knife, the switch is stepped on, the upper round knife moves laterally to the set fixed point, that is, the aluminum substrate is cut and divided, the cut is not laid off, the cut is flat, no flash
3. After the work is completed, please turn off the power and remove the waste.
4. Always pay attention to the protection of the upper and lower cutters.
5. When not working for a long time, please remove the upper and lower cutters and apply oil to protect them. Please wipe them before use.
6. Pay attention to check the tightening of each screw.
Shenzhen Nsdtech Technology Co., Ltd. specializes in production and sales: sub-board machine, PCB sub-board machine, FPC sub-board machine, PCB slitting machine, FPC slitting machine, PCB board dividing machine, FPC shearing press, punching machine , aluminum substrate slitting machine, etc. Website: http://www.nsdtech.net/cn/
SHENZHEN NSD TECHNOLOGY CO.,LTD
TEL： +86（755）2376 0779
FAX： +86（755）2376 0779
ADD： 2F,QIAN YUTONG BUILDING,QINGJI ROAD,LONGHUA DISTRICT,SHENZHEN CITY,GUANGDONG PROVINCE,PR.CHINA